Interview Questions and Answers For Weaving and Knitting (Part - 1)
 |
| Interview Questions and Answers For Weaving and Knitting (Part - 1) |
1. What is weaving ?
Ans. the process of interlacing two sets of yarns namely
warp and weft, at right angle to make a fabric, according to
design.
2. What is knitting?
Ans. It is the process of producing fabric by transferring
continuous yarns into interlocking loops, each row of loop
hanging from the one immediately preceding it.
3. How many sets of yarn are used in knitting?
Ans. One set (warp or weft).
Interview Questions and Answers For Weaving and Knitting (Part - 2)
4. How many sets of yarn are used in weaving?
Ans. Two sets (warp and weft).
5. Is sizing required in knitted fabric?
Ans. No.
6. Write down the types/ classification of knitting.
Ans. Two types,
Warp knitting &
Weft knitting.
7. Is yarn preparation is needed in knitting?
Ans. No.
8. Is knitting fabric produce by inter looping?
Ans. Yes.
9. Is weaving fabric produce by interlacing?
Ans. Yes.
10. In which knitting, a fabric is produce by single yarn?
Ans. Weft knitting.
11. What is the other name of warp yarn?
Ans . Ends
12. Write down the loom driving system ?
Ans .
Hand driving (hand loom) &
Electric motor driving (power loom)
13. Write down/ what are the different types of shed?
Ans.
Bottom close shed
Center close shed
Semi-open shed
Open shed
14. What is shedding?
Ans. Shedding is the act of dividing the warp threads
according to design into two parts, to allow the passage of
shuttle/weft inserting element from one side of the loom to
the other.
15. Write down/what are the types of shedding
mechanism?
Ans.
Paddle/treadle shedding (used in hand
loom)
Tappet shedding (used in power loom)
Dobby shedding (used in power loom, at
past used in hand loom)
Jacquard shedding (both hand & power
loom are used now)
Combined shedding
16. Normally tapped shedding mechanism produces square
design (e.g. 4x4, 6x6, 7x7, etc.) (Yes /no)
Ans. Yes.
17. We can produce basic weave structures (i.e plain,
twills satin) in tapped shedding (yes/no)
Ans. Yes
18. Where open shed is used?
Ans. Tapped loom
19. What is fabric?
Ans: Interlacement of two or more thread of yarn.
20. What are the primary motion?
Ans. The primary motion are as follows-
Shedding
Picking
Beating
Interview questions for Wet processing
21. What are the secondary motion?
Ans. The secondary motion are as follows :
Let off
Take-up
22. What are the tertiary motion
Ans. The tertiary motion are as follows-
Warp stop motion
Weft stop motion
Warp protector
Weft protector
23. Where bottom & center close shed are used?
Ans. Hand jacquard looms to produce delicate fabrics.
24. Where semi-open shed is used?
Ans. Double lift dobby & Jacquard.
25. One shedding + one picking + one beating =?
Ans. One weaving cycle/ loom cycle/picks cycle
26. One picking tapped insert one pick(True or False)?
Ans. True
27. What is the result of unequal shedding?
Ans. Wrong design & stitching
28. What are the maximum numbers of healed frame
controlling capacity in tapped shedding mechanism?
Ans. 14
29. Dobby shedding mechanism can produce both square
and rectangular size design (yes/no)
Ans. Yes
30. What types of design can be produced by Jacquard
looms?
Ans. Any design
21. What are the secondary motion?
Ans. The secondary motion are as follows :
Let off
Take-up
22. What are the tertiary motion
Ans. The tertiary motion are as follows-
Warp stop motion
Weft stop motion
Warp protector
Weft protector
23. Where bottom & center close shed are used?
Ans. Hand jacquard looms to produce delicate fabrics.
24. Where semi-open shed is used?
Ans. Double lift dobby & Jacquard.
25. One shedding + one picking + one beating =?
Ans. One weaving cycle/ loom cycle/picks cycle
26. One picking tapped insert one pick(True or False)?
Ans. True
27. What is the result of unequal shedding?
Ans. Wrong design & stitching
28. What are the maximum numbers of healed frame
controlling capacity in tapped shedding mechanism?
Ans. 14
29. Dobby shedding mechanism can produce both square
and rectangular size design (yes/no)
Ans. Yes
30. What types of design can be produced by Jacquard
looms?
Ans. Any design
Related tag:
What is weaving question and answer?
What is knitting question and answer?
What is common between weaving and knitting?
What is difference between weaving and knitting?
multiple choice questions on weaving
fabric interview questions
textile dyeing interview questions
basic questions for textile engineering
basic textile knowledge pdf
weaving interview questions and answers
textile spinning interview questions pdf
textile interview questions Bangla
আরও পরুন: